+0086-400-870-8989
Home
Products
Integrators
Supplier
Operation Video
Download Center
About Us
English
中文
日本語
한국어
Português
ภาษาไทย
Deutsch
Français
English
Online exploration factory
+86 400-870-8989
E-mail
BRTIRBR2260A
Six-axis Robot
- Simple Operation
- Quick response
- Safe And Efficient
Product Introduction
BRTIRBR2260A type robot is a six-axis robot developed by BORUNTE. It has a maximum load of 60kg and a arm span of 2200mm. The shape of the robot is compact, and each joint is equipped with a high-precision reducer. The high-speed joint speed can flexibly carry out sheet metal handling and sheet metal bending. The protection grade reaches IP54 at the wrist and IP40 at the body. The repeat positioning accuracy is ±0.1mm.
Accurate positioning
Fast
Long service life
Low failure rate
Reduce labor
Telecomm unication
Basic Parameters
| Item | Range | Max.speed | |
| Arm | J1 | ±160° | 118°/s |
| J2 | -110°/+50° | 84°/s | |
| J3 | -60°/+195° | 108°/s | |
| Wrist | J4 | ±180° | 204°/s |
| J5 | ±125° | 170°/s | |
| J6 | ±360° | 174°/s | |
| Arm Length (mm) | Loading Ability (kg) | Repeated Positioning Accuracy (mm) | Power Source (kVA) | Weight (kg) |
| 2200 | 60 | ±0.1 | 8.44 | about 750 |
trajectory chart
No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.
Precautions for Storage and Handling Caution:
Do not store or place the machine in the following environment, otherwise it may cause fire, electric shock or machine damage.
1. Places exposed to direct sunlight, places where the ambient temperature exceeds the storage temperature conditions, places where the relative humidity exceeds the storage humidity, or places with large temperature differences or condensation.
2. Places close to corrosive gas or flammable gas, places with a lot of dust, salt and metal dust, places where water, oil and medicine drip, and places where vibration or shock can be transmitted to the subject. Please do not grab the cable for transportation, otherwise it will cause damage or failure of the machine.
3. Do not stack too much products on the machine, otherwise it may case machine damage or failure.
Product Recommendation
Purchase Consultation
