Welcome to the official website of BORUNTE
Borunte Robot Co., Ltd+0086-400-870-8989
Five-axis servo Manipulator

BRTR11WDS5PC/FC

Five-axis servo Manipulator

  • Simple Operation
  • Quick response
  • Safe And Efficient

Product Introduction

BRTR11WDS5PC/FC series is suitable for 320T-470T horizontal injection molding machine to take out the finished product and nozzle, arm form telescopic type, two-arm, five-axis AC servo drive, can be used for quick removal or in-mold sticking, in-mold inserts and other special product applications, accurate positioning, high speed, long life, low failure, installation manipulator can increase production capacity (10-30%), reduce the defective rate of products, ensure the safety of operators, and reduce manual labor. Accurately control production, reduce waste and ensure delivery. The integrated control system of five-axis drive and control: less signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high repetitive positioning accuracy, multi-axis can be controlled at the same time, simple equipment maintenance and low failure rate.

  • Accurate positioning

    Accurate positioning

  • Fast

    Fast

  • Long service life

    Long service life

  • Low failure rate

    Low failure rate

  • Reduce labor

    Reduce labor

  • Telecomm unication

    Telecomm unication

Basic Parameters

Power Source (kVA) Recommended I.M.M (ton) Traverse Driven Model of EOAT
4.6 320T-470T AC Servo motor four suctions two fixtures
Traverse Stroke (mm) Crosswise Stroke (mm) Vertical Stroke (mm) Max.loading (kg)
1700 P:600-R:600 1100 10
Dry Take Out Time (sec) Dry Cycle Time (sec) Air Consumption (NI/cycle) Weight (kg)
2.49 7.2 4 255

Model representation: W:Telescopic type. D:Product arn +runner arn. S5:Five-axis driven by AC Servo Motor(Traverse-axis、Vertical-axis+Crosswise-axis).

The above-mentioned cycle time are the results of our company's internal test standard. In the actual application process of the machine, they will vary according to the actual operation.

trajectory chart

ABCDEFG
1426.5234211002901700369165
HIJKLMN
1761064816001080286600

No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.

Precautions for Storage and Handling Caution:

Do not store or place the machine in the following environment, otherwise it may cause fire, electric shock or machine damage.

1. Places exposed to direct sunlight, places where the ambient temperature exceeds the storage temperature conditions, places where the relative humidity exceeds the storage humidity, or places with large temperature differences or condensation.

2. Places close to corrosive gas or flammable gas, places with a lot of dust, salt and metal dust, places where water, oil and medicine drip, and places where vibration or shock can be transmitted to the subject. Please do not grab the cable for transportation, otherwise it will cause damage or failure of the machine.

3. Do not stack too much products on the machine, otherwise it may case machine damage or failure.

Product Recommendation

Purchase Consultation