Lurking AGV
BRTAGV12010A is a lurking jack-up transport robotusing laser SLAM with QR code navigation, with a loadof 100kg. Laser SLAM and QR code navigation can beswitched freely to meet multiple scenes and differentaccuracy requirements. In complex scenes with manyshelves, the QR code is used for precise positioning, drilling into the shelves for packing and handling. Laser SLAM navigation is used in fixed scenes, which is notlimited by the ground QR code and can operate freely.
Accurate positioning
Fast
Long service life
Low failure rate
Reduce labor
Telecomm unication
Basic Parameters | |
Navigation mode | Laser SLAM & QR navigatior |
Driven mode | Two wheel differential |
L*W*H | 998mm*650mm*288mm |
Turning radius | 551mm |
Weight | About 125 kg |
Rated loading | 100kg |
Ground clearance | 25mm |
Jacking plate size | R=200mm |
Maximum jacking height | 80mm |
Performance Parameters | |
Trafficability | ≤3% Slope |
Kinematic accuracy | ±10 mm |
Cruise Speed | 1m/s(≤1.5m/s) |
Battery Parameters | |
Battery capacity | 24Ah |
Continuous running time | 8H |
Charging method | Manual、Auto、Quick replace |
Specific Equipments | |
Laser radar | ✓ |
QR code reader | ✓ |
Emergency stop button | ✓ |
Speaker | ✓ |
Atmosphere lamp | ✓ |
Anti-collision strip | ✓ |
No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.
Precautions for Storage and Handling Caution:
Do not store or place the machine in the following environment, otherwise it may cause fire, electric shock or machine damage.
1. Places exposed to direct sunlight, places where the ambient temperature exceeds the storage temperature conditions, places where the relative humidity exceeds the storage humidity, or places with large temperature differences or condensation.
2. Places close to corrosive gas or flammable gas, places with a lot of dust, salt and metal dust, places where water, oil and medicine drip, and places where vibration or shock can be transmitted to the subject. Please do not grab the cable for transportation, otherwise it will cause damage or failure of the machine.
3. Do not stack too much products on the machine, otherwise it may case machine damage or failure.