Welcome to the official website of BORUNTE
Borunte Robot Co., Ltd+0086-400-870-8989
0805A+Pneumatic floating pneumatic spindle

BRTUS0805AQQ

0805A+Pneumatic floating pneumatic spindle

  • Simple Operation
  • Quick response
  • Safe And Efficient

Product Introduction

BORUNTE pneumatic floating pneumatic spindleis designed to remove small contour burrs and moldgaps.lt uses gas pressure to adjust the lateral swingforce of the spindle, making the radial output forceof the spindle. By adjusting the radial force throughan electrical proportional valve and adjusting thecorresponding spindle speed through pressure regulation, the goal of high-speed polishing is achieved.Generally,it needs to be used in coniunction withelectrical proportional valves.It can be used to remove fine burrs on iniectionmolding,aluminum iron alloy parts, small moldseams, and edges

  • Accurate positioning

    Accurate positioning

  • Fast

    Fast

  • Long service life

    Long service life

  • Low failure rate

    Low failure rate

  • Reduce labor

    Reduce labor

  • Telecomm unication

    Telecomm unication

Basic Parameters

Item Range Max.speed
Arm J1 ±170° 237°/s
J2 -98°/+80° 267°/s
J3 -80°/+95° 370°/s
Wrist J4 ±180° 337°/s
J5 ±120° 600°/s
J6 ±360° 588°/s
Arm Length (mm) Loading Ability (kg) Repeated Positioning Accuracy (mm) Power Source (kVA) Weight (kg)
940 5 ±0.05 3.42 about 53

trajectory chart

Basic Parameters

trajectory chart

No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.

Precautions for Storage and Handling Caution:

Do not store or place the machine in the following environment, otherwise it may cause fire, electric shock or machine damage.

1. Places exposed to direct sunlight, places where the ambient temperature exceeds the storage temperature conditions, places where the relative humidity exceeds the storage humidity, or places with large temperature differences or condensation.

2. Places close to corrosive gas or flammable gas, places with a lot of dust, salt and metal dust, places where water, oil and medicine drip, and places where vibration or shock can be transmitted to the subject. Please do not grab the cable for transportation, otherwise it will cause damage or failure of the machine.

3. Do not stack too much products on the machine, otherwise it may case machine damage or failure.

Product Recommendation

Purchase Consultation