+0086-400-870-8989
Home
Products
Integrators
Supplier
Operation Video
Download Center
About Us
English
中文
日本語
한국어
Português
ภาษาไทย
Deutsch
Français
English
Online exploration factory
+86 400-870-8989
E-mail
BRTNN15WSS5P/F
Five-axis servo Manipulator
- Simple Operation
- Quick response
- Safe And Efficient
Product Introduction
BRTNN15WSS5P series is suitable for 470T-800T plastic injection molding machine, five-axis AC servo drive, standard AC servo drive shaft, the rotation angle of the A-axis:360° , and the rotation angle of the C-axis:180° , which can locate and adjust the fixture angle freely, it has a long life, high accuracy, low failure rate, simple maintenance, mainly for rapid removal or complex angle removal applications, especially long shaped products such as automotive products, washing machine.
Accurate positioning
Fast
Long service life
Low failure rate
Reduce labor
Telecomm unication
Basic Parameters
| Power Source (kVA) | Recommended I.M.M (ton) | Traverse Driven | Model of EOAT |
| 3.7 | 470T-800T | AC Servo motor | two suctions two fixtures |
| Traverse Stroke (mm) | Crosswise Stroke (mm) | Vertical Stroke (mm) | Max.loading (kg) |
| 2200 | 900 | 1500 | 15 |
| Dry Take Out Time (sec) | Dry Cycle Time (sec) | Air Consumption (NI/cycle) | Weight (kg) |
| 3.37 | 11.23 | 3.2 | 695 |
Model representation: W:Telescopic type. S:Product arm. S5:Five-axis driven by AC Servo Motor(Traverse-axis、AC-axis、Vertical-axis+Crosswise-axis).
The above-mentioned cycle time are the results of our company's internal test standard. In the actual application process of the machine, they will vary according to the actual operation.
trajectory chart
| A | B | C | D | E | F | G |
| 1757 | 3284 | 1500 | 567 | 2200 | / | 195 |
| H | I | J | K | L | M | N |
| / | / | 1397 | / | 343 | 420 | 900 |
No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.
Precautions for Storage and Handling Caution:
Do not store or place the machine in the following environment, otherwise it may cause fire, electric shock or machine damage.
1. Places exposed to direct sunlight, places where the ambient temperature exceeds the storage temperature conditions, places where the relative humidity exceeds the storage humidity, or places with large temperature differences or condensation.
2. Places close to corrosive gas or flammable gas, places with a lot of dust, salt and metal dust, places where water, oil and medicine drip, and places where vibration or shock can be transmitted to the subject. Please do not grab the cable for transportation, otherwise it will cause damage or failure of the machine.
3. Do not stack too much products on the machine, otherwise it may case machine damage or failure.
